Installation Instructions; Before Using Your Portable Washer - Danby DWM045WDB Guide D'utilisation Et D'entretien

Installation Instructions

1. Detergent Case
2. Inner Tub
3. Control Panel
4. Base
5. Noise Proof Plate
6. Adjustable Foot or Roller
7. Drain Hose
8. Power Supply Cord
9. Agitator
10. Inlet Hoses (Please turn off the
tap after use)
Inlet Hose
1 piece

BEFORE USING YOUR PORTABLE WASHER

Remove the exterior and interior packing.
You will need the following tools:
• Wrench
• Pliers
• Screwdriver
Check to be sure you have all of the following parts:
• Two (2) Inlet Hoses
• Faucet Adapter
• One (1) Noise Proof Plate With Screws
• Four (4) Rollers
1. Remove shipping brace. Note - It should be saved and used (to prevent damage to washer components) whenever
washer is moved or transported to a new location. The shipping brace is a small plastic brace that is adhered to the
packing styrofoam.
2. Clean the interior surface with lukewarm water using a soft cloth.
3. Allow 2 inches of space between the back and sides of the appliance.
1
2
3
4
5
Inlet Hose Noise Proof Plate
1 piece (2 sets of screws)
Connector
1 piece
1 piece
3
10
9
8
7
6
Roller
4 pieces