Operation Instructions; Preparation - Danby DWM045WDB Guide D'utilisation Et D'entretien

Operating Instructions

PREPARATION

1. Connect inlet hose / hoses to the
water faucet. Don't turn on the power if
the water pressure is lower than 7 PSI
and higher than 0.5 Mpa.
2. Turn on the faucet.
5. Put the wash load into the tub.
3. Plug the unit into the socket. For
safety, make sure the plug and socket
have a grounded connection.
6. Add an appropriate quantity of de-
tergent into the detergent dispenser.
8
4. Insert the end of the drain hose
into the hook shelf and hang the drain
hose over a drain outlet. Secure the
hose so it will not fall to the fl oor.
7. Close the lid. If the lid is not closed
the washing machine will not operate
(See E2 error code).