Reely ROAD Detonator Notice D'emploi page 39

Setting Rear Axle Camber:
C
For setting the camber, turn the upper transverse link
(A) as for the front axle.
Because the upper transverse link has a left and right
hand thread at either end, the transverse link does not
need to be dismantled for the camber to be adjusted
A
At the damper bridge (B) and in the axle spur (C), there
B
are several more suspension points for the upper trans-
verse link. When the wheel rebounds, the camber
changes depending on the installation position (e.g.
stronger camber when the wheel is pushed in).
39