Seca 984 Mode D'emploi Et Garantie page 18

1. Congratulations!
English
In the seca 984 electronic bed scale you
have acquired a piece of high-precision
equipment which allows bed-ridden pa-
tients to be weighed simply and gently.
seca has been putting its experience at
the service of health for over 150 years
now, and as market leader in many coun-
tries of the world, is always setting new
standards with its innovative develop-
ments for weighing and measuring.
The seca 984 electronic bed scale is used
primarily in hospitals and dialysis centres
in accordance with national regulations.
In addition to the mobile bed scale with its
equipment trolley, there is also a stationary
model in which the measuring electronics
are accommodated in a housing under-
neath the bed. These instructions de-
scribe the mobile bed scale but apply
equally to the stationary model.
The new type of lifting mechanism allows
the scale to be installed with minimum ef-
fort. It is no longer necessary to move the
2. Safety
Before using the new scale, please take a little time to read the following safety instruc-
tions.
• Follow the instructions in the instruc-
tions for use.
• Keep the operating instructions and the
declaration of conformity in a safe
place.
• Do not drop the measuring feet or sub-
ject them to violent shocks.
• The connecting cables between the
measuring feet and the equipment trol-
ley must be routed so that they do not
present a tripping hazard.
• Ensure that the mains unit has the right
supply voltage (see "Technical data" on
page 31).
• Ensure that the cables are not crushed
and do not come into contact with hot
objects.
18
bed, and the swivel position of the bed's
castors is irrelevant.
Weight display can be switched between
kilograms (kg), pounds (lbs) and stones
(sts). Weight is determined within a few
seconds.
The device allows weight to be monitored
for several hours. In the event of a power
failure, rechargeable batteries secure the
necessary power supply.
In addition to the conventional determina-
tion of weight, the seca 984 also has a
function for determining body mass index.
For this purpose, height is entered on the
keypad and the body mass index associ-
ated with the weight value is output.
A limit value can be set for use in dialysis
centres, with an alarm sounding if this val-
ue is not reached.
All the parts can be accommodated on the
equipment trolley to allow the scale to be
used on a mobile basis.
• The actuation levers should be folded
against the measuring feet once posi-
tioning is complete so as to prevent a
tripping hazard.
• As a function of its design, the
seca 984 bed scale may be used only
on floors which have been produced
according to the relevant national
standards for the production of floors
and floor coverings, with tolerances
having been observed. DIN 18202 ap-
plies to Germany.
• Have repairs carried out only by author-
ised persons.