Sharp SV-2188S Manuel De Fonctionnement page 15

Examples of External Speaker Connection
Typical connection (S-VHS VCR and TV) through the S-VHS terminal.
(SV-2189/2589/2889S only)
(1) Connecting the Super Woofer TV Rack
(SW-2188/SW-2588/SW-2888: Optional)
Notes:
Super Woofer TV Rack (4 0)
(SV-2589/2889S)
Note:
To view a higher quality picture using the S-VHS terminal set the S-VHS switch to the ON position.
(2) Connecting External Speakers
If the audio output signal is mono, connect the audio terminal of the S-VHS VCR or S-VHS Camcorder
F Notes:
Note:
1. Sound is heard only from the external
speakers.
. Use external speakers of 4 0 or greater.
Use external speakers which have maximum
permissible input levels of greater than
50W(MPO).
(3) Connecting both the Super Woofer (Op-
tional) and External Speakers.
Notes:
1. Sound is heard from the external speakers
and the Super Woofer.
2. Use external speakers greater than 80 for the
left and right channels.
3. Use external speakers which have maximum
Ko
permissible input levels of greater than
at : 25W(MPO).and use a Super Woofer which
Left speaker (8.2)
Super Woofer Right speaker (80)
has a maximum: permissible input level of
TV Rack (4 Q) greater than SOW{MPO).