Sharp SV-2188S Manuel De Fonctionnement page 13

You can store a set of four different Teletext
page numbers into 16 programme positions.
This means that you can store a total of 64
Teletext pages in the TV image memory.
Browse button E3
Pressing this button displays a Teletext page
at random, a further press displays a differ-
ent random page and so on.
How to Use the Page Memory
When you select Teletext mode, 4 coloured
page numbers appear in the lower part
screen.
These page numbers are those stored in the
internal memory.
You can change these numbers to choose
other pages that you want to store. To specify
a page number, first press any of the
coloured buttons on the remote control trans-
mitter, then input the desired page number
into the corresponding coloured brackets us-
ing the page selector buttons or 0-9 digit
buttons.
RED GREEN YELLOW CYAN
ie roe
Finally press the hold the store button until
the coloured brackets change to white. The
specified Teletext page has now been stored
in the page memory.
Note:
All four page numbers will be stored at the
same time.
Pr/CH/CC
Es)
13
Note:
¢ Teletext page numbers stored, are left intact
after the power is switched off. If there is no
page that matches the page number in the
brackets, the brackets will blink.
© If programme channel selection is used, a
set of 4 teletext pages can be stored in any
combination (or all) of the programme posi-
tions 1-15. A single set of 4 teletext pages
can be stored in one of the programme posi-
tions 16-99, the AV channel or the 21-pin
Euro-SCART source. If real channel selec-
tion is used, only one set of 4 teletext pages
can be stored. Whenever a single set of
teletext pages is stored, the previously
stored set is erased. Programme positions
1-15 in the programme channel selection
mode are not affected by this operation.
VCR Mode
Channel selectors (A/V)
These buttons are used for changing chan-
nels and setting the timer.
Play button >
Press this button to start playback.
Record button @
Press this button to start recording. If the
video cassette is protected against record-
ing, it will be ejected.
Fast forward/picture search forward
>r and Rewind/picture search
reverse << buttons
Both these buttons have the following
function:
Fast forward/Rewind — During playback,
pressing these buttons will play the tape for-
wards or backwards at high speed.
Pause/Still Frame button p<
Press this button to temporarily stop the tape
during recording or playback. Press again to
resume the previous mode. A still picture will
be displayed when the button is pressed dur-
ing playback.
Note:
Pause/Still mode will disengage automatical-
ly after about 5 minutes to avoid damage to
the tape.
Stop button #
Press this button to stop playback or
recording.
Operate button ©)!
Press this button to turn your VCR on.