Sharp SV-2188S Manuel De Fonctionnement page 10

How to Adjust the Channel Setting
Channel Control Functions
107 pretuned station signals and cor-
responding real channel numbers
Station |Real channel Station |Real channel
signals| numbers signals numbers
Note:
The PriCH/CC button, —/-- button and 0-9
digit buttons are operated with the remote
control transmitter.
3. If fine tuning is required, press the fine
tuning A or V button and protect button.
Channel search stops and the channel
can be fine tuned.
1 . Disengaging the AFT — Disengag-
ing the AFT (Automatic Fine Tun-
ing) after all channels have been
preset:
Your TV set is equipped with an AFT (Auto-
The channel mode that is displayed can be matic Fine Tuning) feature which automati-
changed by pressing the Pr/CH/CC button. Pr 4 cally performs fine tuning under normal
, et ie appropriate channel mode (CH > CHO2--—-l-— ; reception. The feature is, however, ineffec-
— Pr) will be displayed on the screen. _ tive with weak signals. If the signal on a par-
M10/S10 Ordinarily, specify the number of digits (one : i ht occa menace put ticular channel is so weak that the AFT does
uvsit > or two) with the —/-- button when selecting . : not work properly, disengage the AFT and
u10e/s20 | cCc20 programme channels with the 0-9 digit manually tune-in the station for the best
H M10 CC42 buttons. Pr 4 Sar pane
: ty
1. Select the
channel for which you want to
Sa ete turn the AFT off.
. [Channelpreset
sd
. Repeat steps 1 through 4 as required for
2. hid pissing and Bolling NR oe
Up to 99 channels can be preset.
presetting other channels.
a on p "4 Sencage: the AET aor thot
1. Sporty the programme channel number channel. Now use a fine tuning button (A
Example: or) untl the beet pcture quality f
Example: programme channel 1 tained.
The following procedure allows you to skip
over non-preset channels when selecting Note:
Pr 1 channels with the channel selector A or V
CH21 button.
Press the preset button and protect but- 1. Specify the programme channel to be
: Pale: skipped.
ton at the same time. This will set the TV ;
to the real channel presetting mode. (Example: programme channel 39)
Pr 39
Pr 1
r CH21 one | |
To store a CATV channel in the memory, Press the preset button and the protect
press the Pri/CH/CC button and set the button at the same time.
TV to the CATV channel presetting mode.
AFT for that channel is activated again.
'i ais Note:
Pr 1 To reengage the AFT for the preset channel
CC02 ' on which you stored AFT off mode.
2. Press the skip button and protect button. 1. Select the channel for which you want to
"|
To permanently store the AFT off mode for a
preset channel, first disengage the AFT, then
press the protect button and the memory but-
ton simultaneously. (At this point, the channel
number on the screen changes from green
to yellow, to indicate that the AFT is dis-
engaged.)
@ Available in Ital
© Available in Holland
A Available in Switzerland
1. Channel Selection Modes
The TV has two channel selection modes:
real channel selection and programme
channel selection.
2. Engaging the AFT — Reengaging
the AFT:
Once you select another channel after disen-
As explained in the chart, this TV's frequen-
cy synthesizer tuner has 107 stations in per-
manent memory. These VHF, UHF and
CATV channels can be accessed at any time.
3. Programme Channel Selection 2. Input a real channel number to be memo- set the AFT.
There are 99 positions available for preset- i i n g th digit b 2. Repeat the channel preset procedure
: \ rized using the 0-9 digit buttons or the ,
ting the most frequently viewed channels for hannel sel Pr 39- again. (The channel number on the
; CHANNEL SE ector (A/V) buttons. CHOo2 screen will change from yellow back to
instant recall. (Example: on-air real channel 2)
green.) ;
4. Channel Displays 3. Press the memory button and protect but-
If inputting it with the channel selector A i i j
The channel you are watching will be indicat- or V button, the Auto search will function feo: This compncss Sip sound:
ed on the screen in the following manner.
and the tuner will automatically seek and
tune into the most adjacent broadcasting
Real channel (VHF/UHF) channel.
CHi2
Real channel (CA cr T|
em CC12
Pr 1 |
CH12
Pr 39
CH02
:
To preset a skipped channel, perform
steps 1 though 4 of ''Channel preset'.
'i Pr 1
CHO02
Programme channel
10