To Replace The Oven Door; Replacing An Oven Light - Sharp Swb3085Hs Manuel De Fonctionnement

CLEANING AND CARE

TO REPLACE THE OVEN DOOR:

Holding the door firmly, insert the upper arms of both hinges
1
into the slots. The recesses must hook on the lips.
A
B
A - Upper Arm
B - Recess
Open the oven door.
2
NOTE: You should hear a "click" sound when the door is
correctly in place.
Move the hinge latch on each side back into the locked
3
position.
Open and close the door to test that it operates freely. If it
4
does not, repeat the door removal and replacement process.
Close and open the door slowly to assure that it is correctly
5
and securely in place.

REPLACING AN OVEN LIGHT

WARNING
ELECTRICAL SHOCK HAZARD
• Make sure the oven and lights are cool and power to the
oven has been turned off before replacing the light bulb(s).
• The lenses must be in place when using the oven. The
lenses serve to protect the light bulb from breaking.
• The lenses are made of glass. Handle carefully to avoid
breakage.
• Failure to do so could result in death, electric shock,
cuts or burns.
The oven light is a standard 25 watt (G9) appliance bulb.
Disconnect power at the main power supply (fuse or breaker
1
box).
E
C
D
C - Slots
D - Lip
Using a Phillips-head screwdriver, remove the screw and
2
remove the cover.
Remove the burned out bulb from the socket.
3
NOTE: To avoid damage or decreasing the life of the new bulb,
do not touch bulb with bare fingers. Wear cotton gloves or use
a tissue when replacing the light bulb.
Replace the bulb and replace the bulb cover.
4
Reconnect power at the main power supply (fuse or breaker
5
box).
24
A
A - Light Cover
B A
A - Light Cover
B - Light Bulb