Vibiemme LOLLO Manuel D'instructions page 84

+
4
5
38
-
15.1,
3
ADJUstInG
2
PRessURe.
You can adjust the pressure and hence the temperature of the water in the boiler by
means of the pressure switch viewing it on the pressure gauge (1).
•
Remove the cup heating plate (2) as described in the paragraph on installation.
•
Act on the screw (3) of the pressure switch turning it CLOCKWISE to decrease
the pressure and ANTICLOCKWISE to increase it.
15.2,
ADJUstInG tHe PUMP PRessURe.
1
You can adjust the pump pressure checking it on the pressure gauge (4).
•
Remove the cup heating plate (2) as described in the paragraph on installation.
•
Act on the screw (5) of the pump turning it CLOCKWISE to decrease the
pressure and ANTICLOCKWISE to increase it.
W ARNING: These operations must be carried out by a qualified
technician operating with extreme care.
tHe BoILeR
15,
ADJUstMents.
teMPeRAtURe/