Vibiemme LOLLO Manuel D'instructions page 69

Each unit has a selector knob for coffee dispensing.
Selector knob for semiautomatic version.
1 Coffee dispensing start button "
•
Press the button (1) to start dispensing coffee; the relative LED will come on;
to stop dispensing, press the button (2).
2 Coffee dispensing stop button "
• Press the button (2) to stop dispensing coffee; the LED on the button (1) will
go off.
Selector knob for automatic version.
3 Continuous dispensing/programming button "
• Press the button (3) to start continuous coffee dispensing; the relative LED will
come on; to stop dispensing, press the button again and the LED will go off.
• Press and hold down the button for 5 seconds; the relative LED will come on
indicating that you have entered dose programming; pressing any one of the
buttons 4, 5, 6 or 7 within 5 seconds, you can program the desired doses
(see the paragraph "Programming the doses").
4 "One long coffee" dispensing button "
• Press the button (4) to start coffee dispensing; the relative LED will come
on and when the programmed amount has been reached, dispensing will
automatically stop and the LED go off.
5 "Two long coffees" dispensing button "
• Press the button (5) to start coffee dispensing; the relative LED will come
on and when the programmed amount has been reached, dispensing will
automatically stop and the LED go off.
6 "Two short coffees" dispensing button "
• Press the button (6) to start coffee dispensing; the relative LED will come
on and when the programmed amount has been reached, dispensing will
automatically stop and the LED go off.
7 "One short coffee" dispensing button "
• Press the button (7) to start coffee dispensing; the relative LED will come
on and when the programmed amount has been reached, dispensing will
automatically stop and the LED go off.
9,
DesCRIPtIon oF tHe UnIt ContRoLs.
".
".
".
".
".
".
".
SEMIAUTOMATIC VERSION
AUTOMATIC VERSION
7
6
1
2
3
4
5
23