Vibiemme LOLLO Manuel D'instructions page 51

Vibiemme S.r.l. has taken every possible precaution to ensure safe operation and an efficient machine. The
incorporated safety devices are aimed at protecting operators and authorised technicians.
•
Carefully read this manual before installing, starting and using the machine. Inobservance of this instruction
may cause damage to the machine, poor machine performance, and risks to health or personal injury.
•
This manual is an integral part of the machine and must always be available to the user and/or maintenance
technician. In case of loss or if requiring further information, contact your local dealer or the manufacturer.
This manual reflects the state of technology at the present time and cannot be considered inadequate for
any subsequent updates; the manufacturer reserves the right to modify the manual without the obligation to
update previous versions, except in exceptional cases.
•
The machine may be used by children older than 14 years and by people with reduced physical, sensorial or
mental capacities, or lack of experience or the necessary knowledge, provided under supervision or after
receiving instructions on safe use of the machine and having understood the inherent hazards. Children may
not play with the machine. Cleaning and maintenance to be carried out by the user must not be carried out
by children.
•
Before installing the machine, check that the dedicated area is compatible with the size and weight of the
machine.
•
Do not install the machine near heat sources.
•
Do not use the machine with wet hands or bare feet.
•
Before cleaning and/or servicing the machine and before removing any guard, check that the main switch
is set to Off (O) so that power to the machine is cut during the operation.
•
The power supply system of the purchaser must be fitted with an automatic breaker upstream of the main
switch of the machine and a suitable grounding system that meets all the requirements of the accident-
prevent regulations.
•
If you need to operate on or near the main switch, cut the power to the line to which the main switch is
connected.
•
Do not remove the safety devices.
•
In order to prevent personal risks, only use suitable tools compliant to the national safety standards.
1,
GeneRAL W ARnInGs.
5