Self-Diagnosis Function - Sony MDS-NT1 Mode D'emploi

Self-Diagnosis Function

The deck's self-diagnosis function automatically checks the condition of the MD deck when an error
occurs, then indicates the nature of the error through the two indicators. If the indicators light up or flash,
find them in the following table and perform the indicated countermeasure. Should the problem persist,
consult your nearest Sony dealer.
Playback
Indicator
(green)
Flashes
Lights up
Flashes
Both indicators flash alternately
GB
12
Recording Cause/Remedy
Indicator
(red)
Flashes The recording was not made properly. (C13/Rec Error)
, Set the deck in a stable surface, and repeat the recording procedure.
Flashes The inserted MD is dirty (with smudges, fingerprints, etc.), scratched, or
substandard in quality. (C13/Rec Error)
, Replace the disc and repeat the recording procedure.
The deck could not read the TOC on the MD properly. (C13/Read Error)
, Take out the MD and insert it again.
Lights up The deck could not read the TOC on the MD properly. (C14/Toc Error)
, Insert another disc.
, If possible, erase all the tracks on the MD.
Lights up There is an error in the internal data that the deck needs in order to operate.
(E0001/MEMORY NG)
, Consult your nearest Sony dealer.
Flashes There is a problem with the optical pickup. (E0101/LASER NG)
, Consult your nearest Sony dealer.
An MD loading problem has occurred. (E0201/LOADING NG)
, Consult your nearest Sony dealer.