Ca-Mi MIKO Mode D'emploi page 15

•
Extract the power supply cable and insert the plug into the mains socket.
It is recommended to unwind the entire length of the power supply cable to prevent dangerous
overheating. If the power supply cable is damage and must be replaced contact the CA-MI technical
service;
•
Open the nebulizer 2 by unscrewing the lid;
•
Pour the medicine prescribed by the doctor into the nebulizer;
•
Re-close the nebulizer, re-screwing the lid;
•
Connect air pipe 5 to the air exit well 4;
•
Connect the other end of the pipe to the connection in the lower part of the nebulizer;.
•
Connect the desired accessory to the nebulizer: child mask or adult mask or mouth-piece;
•
Ensure that the supplied air filter (6) is present;
•
Press switch 1 on position I to proceede with nebulization;.
•
On completing of nebulization, press the switch on position 0 and remove the plug from the socket;
•
Wash the nebulizer and its accessories as indicated in the cleaning charter;.
•
Place the cable and accessories inside the box.
Always use the nebulizer facing upwards so that substances and / or medicines cannot escape from the
nebulizer during the normal use.
INSTRUCTION FOR USE
NEVER INHALE IN HORIZONTAL POSITION
NEVER BEND THE NEBULIZER OVER 60°
15
1 – Air Tube
2 – Nebulizer Tank
3 – Nebulization Nozze
4 – Nebulizer Top
5 – Mouthpiece
6 – Adult Mask
7 – Pediatric Mask