Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
G
NOTE!
When both desired temperature
and timer off function have been
activated, the heater will switch on
and off per the set temperature
setting and will stop operating once
the programmed timer setting has
been reached.
AUTO ON
Make sure to set the desired
temperature prior to setting the
timer, so that the heater will shut off
at the desired temperature setting.
If the desired temperature is set,
this function will overrule the timer
function.
With the Auto ON timer setting you can
decide the time that the heater should
automatically switch on.
1. Keep pressing the Mode button until
the timer icon and the Auto ON icon
appear.
2. Use the + and - buttons to set the
heater start time between 1 and 24
hours (default is 1 hour).
3. The heater will automatically turn on
when the set time expires.
4
28
Publicité
Table des Matières
