KitchenAid W10271686B Instructions D’installation page 6

Cabinet Requirements
O
D
N
E
Size Model
30" (76.2 cm) KGCU407
36" (91.4 cm) KGCU462
KGCU463
KGCU467
48" (121.9 cm) KGCU482
KGCU483
KGCU484
* NOTES: Dimension "B" can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet is covered by not less than
0.25" (6.4 mm) flame retardant millboard covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel,
0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
If installing a range hood above the cooktop, follow the range hood instructions for dimensional clearances above the cooktop
surface.
** NOTE: If backwall is constructed of a combustible material and a backguard is not installed, a minimum clearance of dimension A
+ 6" (15.2 cm) is required for 48" (121.9 cm) cooktops and cooktops with a grill.
6
Downloaded from www.Manualslib.com
P
F
L
J
I
K
D
E
A**
Cooktop Cutout
to Back Wall
1½" (3.8 cm)**
1½" (3.8 cm)**
1¾" (4.4 cm)
1¾" (4.4 cm)
1½" (3.8 cm)**
1¾" (4.4 cm)**
1½" (3.8 cm)**
manuals search engine
C
C
B min.*
A**
G
H
L
M
B* C
Cooktop to Optional
Cabinet Backguard
Opening
30" (76.2 cm) 30" (76.2 cm)
42" (106.7 cm) 36" (91.4 cm)
42" (106.7 cm) 48" (121.9 cm)
A. See chart.
B. See chart.
C. See chart.
D. See chart.
E. See chart.
F. 18" (45.7 cm) min. clearance upper
cabinet to countertop
³⁄₄
G. " (1.9 cm) back of cabinet cutout to gas
opening cutout
6⁷⁄₈
H. " (16.1 cm) gas opening cutout depth
I. 12½" (31.7 cm) gas opening cutout width
¹⁄₄
J. 22 " (56.5 cm) cabinet cutout depth
K. 2" (5.1 cm) cabinet side to gas cutout
L. 6" (15.2 cm) min. distance on both sides of the
cooktop to the side wall or other combustible
material above cooking surface
M. 24" (61.0 cm) cabinet depth
¹⁄₄
N. 7 " (18.4 cm) cabinet depth to countertop
O. Notch to be equal on both sides
P. 13" (33.0 cm) upper cabinet depth
D E
Cabinet and Countertop Only
Countertop
29¼" (74.3 cm) 30" (76.2 cm) or
29⁷⁄₈" (75.9 cm) for
zero clearance
35¼" (89.5 cm) 36" (91.4 cm) or
35⁷⁄₈" (91.1 cm) for
zero clearance
47¼" (120.0 cm) 48" (121.9 cm) or
47⁷⁄₈" (121.6 cm) for
zero clearance