Using The Remote Controller - JVC KD-LX50 Manuel D'instructions

Using the remote controller

1
2
3
4
52
1 • Turns on the unit if pressed briefly.
5 • Turns off the unit if pressed and held until "SEE YOU"
appears on the display.
6
• Drops the volume level for a moment if pressed briefly.
Press again to resume the volume.
7
2 • Functions as the BAND button while listening to the radio.
Each time you press the button, the band changes.
• Functions as the DISC + button while listening to the CD
changer.
Each time you press the button, the disc number increases,
and the selected disc starts playing.
• Does not function as the PROG button.
3 • Functions as the PRESET button while listening to the
8
radio.
Each time you press the button, the preset station number
increases, and the selected station is tuned in.
• Functions as the DISC – button while listening to the CD
changer.
Each time you press the button, the disc number decreases,
and the selected disc starts playing.
4 Functions the same as the control dial on the main unit.
Note: This button does not function for the preferred setting mode
adjustment.
5 Select the sound mode.
Each time you press SCM (Sound Control Memory), the mode
changes.
6 Select the source.
Each time you press FUNC (function), the source changes.
7 • Searches stations while listening to the radio.
• Fast forwards or reverses the track if pressed and held
while listening to a CD.
• Skips to the beginning of the next tracks or goes back to
the beginning of the current (or previous tracks) if pressed
briefly while listening to a CD.
8 VCR (KZ-V10) operating buttons
• : Turns on or off the VCR.
• 7 :
Stops playback.
• 1 : Rewinds the tape if pressed and held while watching
a video tape.
• 3 :
Starts playback.
• ¡ : Fast-forwards the tape if pressed and held while
watching a video tape.