Menu Structure - Aeg Th84Cb03Fb Manuel D'utilisation

A signal sounds and an indicator above the
symbol appears.
3. Place cookware on the hob and select a
heat setting level. Increase or decrease
the heat setting level as needed.
The hood will react to the temperature of the
cooking zone, increasing or decreasing the
fan speed level accordingly. The indicators
above the hood symbol appear.
4. Press 0 on the hob control bar to
deactivate a cooking zone or
deactivate the hob.
AUTO will run for some time depending on
the set mode (H1-H4).
The fan speed can be adjusted manually
during cooking by pressing
To deactivate the function, press AUTO. A
signal sounds and the indicator above the
symbol disappears.
If you deactivate the hob while AUTO is
running, the function will be remembered for
the next cooking session.
Boost
The function activates the hood fan at its
maximum speed level.
1. Press to activate the function.
A signal sounds and an indicator above the
symbol appears.
2. Press again to deactivate the function,
if needed.
The function can operate uninterrupted for a
maximum of 8 minutes. After that time the fan
speed setting automatically changes to 3.
You can activate the function again, if
needed.
Auto Breeze
The function automatically sets the hood fan
to continue running after you finish cooking
and switch off the hob. The fan runs at a
minimum speed level for maximum 20
minutes. The function removes any lingering
smells after cooking.
When you use the hob for the first time, the
function is activated by default.
When the function operates, the indicator
above AUTO appears. Once the cycle is
over, the fan switches off automatically.
To deactivate the function while it is
running:
Press AUTO or
The hood fan deactivates.
to
To disable the function completely:
1. Enter the menu: press and hold
2. Press
3. Press
.
4. Press
It is recommended not to disable the
function and to let it run uninterrupted for
the full duration of the cycle.

6.10 Menu structure

The table shows the basic menu structure.
User settings
Sym‐
bol
b
P
H
dF
E
To enter user settings: press and hold
for 3 seconds. Then, press and hold
settings appear on the timer of the left
cooking zones.
Navigating the menu: the menu consists of
the setting symbol and a value. The symbol
appears on the rear timer and the value
appears on the front timer. To navigate
.
seconds. Then, press and hold
on the front timer until dF
appears on the display.
or on the front timer until Off
(--) appears.
to exit.
Setting
Sound
Power limitation
AUTO mode
Auto Breeze
Alarm / error histo‐
ry
for 3
.
Possible options
On / Off (--)
15 - 73
1 - 4
On / Off (--)
The list of recent
alarms / errors.
. The
ENGLISH 15