Display - Sony MDS-DRE1 Mode D'emploi

Display

BANK 1
BANK 2
BANK 3
BANK 4
1 BANK indicators (12)
Light to display the current group (BANK) of tracks
assigned to the pads.
2 Track number and counter display
• During playback or recording, it displays the track
number and track time. The track time blinks when
there are less than 10 seconds left on the track
during playback.
• During stop, it displays the total number of tracks
and the disc time.
3 Status indicators
Light to display the current state of operation.
(Playback, record, pause, etc.)
4 RELOOP indicator (16)
Lights to indicate that a loop has been memorized.
5 LOOP indicator (16)
Blinks when a loop is being set. Lights when looping.
6 REPEAT indicators (19)
• Light during repeat playback.
"REPEAT" lights when set to repeat the entire disc.
"REPEAT 1" lights when set to repeat just one track.
• "1" lights when the unit is set to stop automatically
after each track.
7 Auto mode indicators (14)
Light during auto mode playback.
• "A.CUE" lights when the unit is set to skip over the
blank space at the beginning of each track and pause
just before the sound begins (AUTO CUE).
• "A.PAUSE" lights when the unit is set to pause at
the beginning of each track (AUTO PAUSE).
8 TOC indicators (23, 27)
• "TOC" lights to indicate the presence of TOC data
that has not been written to the disc. "TOC" blinks
when writing the TOC data.
• "TOC EDIT" lights during edit operations.
REHEARSAL TRACK DISC
BACK TRACK
RECORDING
%
TR
REC LOOP
RELOOP
OVER
L.SYNC
PROGRAM
HOT START
M S F
TOC
REPEAT 1 A.CUE
EDIT
A-B A.PAUSE MONO L
9 MONO indicator
Lights during playback of monaural audio signals.
(This unit is not capable of recording in monaural.)
0 Level meters
Display the audio signal levels during playback and
recording.
!¡ HOT START indicator (16)
Lights when the unit is set to the Hot Start play mode.
!™ PROGRAM indicator (20)
Lights when the unit is set to the Program play mode.
!£ L.SYNC indicator (24)
Lights when the unit is set to assign track numbers
automatically during analog recording.
!¢ Name display
Displays disc and track names, Edit Menu parameters,
and Setup Menu parameters (etc.).
!∞ DISC indicator
Lights when the disc name (etc.) is shown in the name
display.
!§ TRACK indicator
Lights when the track name (etc.) is shown in the
name display.
!¶ BACK TRACK RECORDING indicators (25)
"BACK TRACK RECORDING" lights and the disc
image rotates during backtrack recording.
When you stop recording, the indicator blinks as the
unit writes the recorded information to the disc.
If the disc image starts rotating faster and the indicator
blinks during recording, stop using the pad, scrub
dial, and loop functions until the disc image slows
down and the indicator lights steadily. Continuing to
use these functions may cause the unit to stop
recording.
!• REHEARSAL display (28)
Lights during rehearsal playback.
0
4
8
12
20
40
R -dB
9 GB