Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

3 Function
The A-P shift and rotation prior to tightening the pyramid screws and the alignment
nut allows for alignment of the limb to suit the individual user.
When tightened securely using Loctite and torque settings shown, the device offers a
secure way to connect two parts of the limb.
4 Maintenance
Maintenance is to be carried out by competent personnel only.
An annual visual inspection is recommended
• Ensure all screws are secure. If not remove and clean screws, reapply Loctite and
tighten all screws to the correct torque settings.
• Check for visual defects that may affect proper function.
The user should be advised:
To contact their Clinician/Practitioner if their condition changes.
Any changes in performance of the device must be reported to the
Clinician/Practitioner.
Changes in performance may include:
• Any unusual noises
• Excessive play or loss of alignment

5 Limitations on use

Only for use with BladeXT.
Intended life:
A local risk assessment should be carried out based upon activity and usage.
Lifting loads:
User weight and activity is governed by the stated limits.
Load carrying by the user should be based on a local risk assessment.
Environment:
The product is water proof to a maximum depth of 1 metre.
Thoroughly rinse with fresh water after use in abrasive environments such as those that
may contain sand or grit, for example, to prevent wear or damage to moving parts.
Thoroughly rinse with fresh water after use in salt or chlorinated water.
Exclusively for use between -15˚C and 50˚C.
3
938343/4-1114

Publicité

Table des Matières
loading

Table des Matières