General Information On The Device; Standards/ Approvals/ Certifications; Scope Of Supply - Dentsply Sirona inLab MC X5 Notice D'utilisation

3 General information on the device
3.1 Standards/ approvals/ certifications
10
3

General information on the device

3.1

Standards/ approvals/ certifications

CE mark
This product bears the CE mark in accordance with the provisions of
directives 2006/95/EC (Low Voltage Directive), 2006/42/EC (Machinery
Directive), and 2004/108/EC (EMC Directive). As such, the following
standards apply: CISPR 14-1 + A1 + A2, CISPR 14-2, EN55014-1 + A2,
EN55014-2, EN61000-3-2, EN61000-3-3, EN60335-1, and EN60335-2-
65.
CAUTION
CE mark for connected products
Further products which are connected to this unit must also bear the CE
mark. These products must be tested according to the applicable
standards.
3.2

Scope of supply

inLab MC X5 230V (REF 6385129) suction device:
● 230 V suction device
● Filter bag (installed)
● HEPA filter (installed)
● Suction tube, complete
● Interface cable
● Operating Instructions
● Power cable (pre-assembled separately)
inLab MC X5 120V (REF 6485929) suction device:
● 120 V suction device
● Filter bag (installed)
● HEPA filter (installed)
● Suction tube, complete
● Interface cable
● Operating Instructions
● Power cable (pre-assembled separately)
Operating Instructions Suction devices for inLab MC X5 and
Dentsply Sirona
64 98 609 D3608
D3608.201.02.04.02 09.2017