Configuration - LENCO DIR-70 BK Mode D'emploi

Note: If there is already an existing Internet station stored under a preset, it will be over
written when you store the new station.
Recalling Internet station presets 1-250
In internet radio mode:
1. Short press the Preset button. Use the Navigation/Select rotary control to move to the
Preset location and station that you would like to listen to (1-250).
2. Press the Navigation/Select control. The radio will tune to that station and begin to play.

Configuration

1. Sleep Radio:
You can select "Birds", "Piano", "Rain", "Spa", "Space"or "Wave", then press OK button to
step into.
2. History:
List of the ten recently listened stations.
3. Service:
Search radio station-Enter your keyword to search radio station from the list.
Add new radio by adding IP address, the added stations will be stored in My Favorite.
Note that the maximum character of the station name is 250.
4. Alarm
There are three independent alarms-2 alarms of absolute time setting (Alarm 1 and
Alarm 2) and one alarm for relative time setting (Alarm NAP).
Note that the alarm source is from the preset Internet radio if Alarm Sound is set to be
Internet Radio. It can only set one same IR station for Alarm 1 and Alarm 2. When the
alarm is reached the unit connects to the Internet if the set network is available.
Therefore there may be some delay from the alarm to the radio play. If no network is
connection can be established within one minute, the alarm will change to Melody
automatically.
When Alarm "NAP" is set, it alarms once in 5/10/20/30/60/90/120 minutes depending
on which one you have set.
Choose Alarm Volume to set the volume of the alarms.
5. Timer
Countdown timer (max. 100min) +
6. Scheduled Playing
Select "Turn On" to activate the scheduled playing function.
13