LENCO DIR-70 BK Mode D'emploi page 10

6. Now that you have paired your device with the radio, it will connect to it when it is
within range, which is about 10 metres or less (33 feet or less), line of sight.
7. Your device will remain paired with the radio unless you decide to disconnect or 'unpair' it.
Note: You can press the Navigation/Select rotary on the top of your radio to unpair your
current device and search for new devices.
Power on
Short press the Power button.
Power off (Standby)
Short press the Power button. The Standby screen will be displayed with the current date
and time.
Weather location
When you are in Standby mode, you can also set a Weather location
1. Short press the
2. Press the Navigation/Select rotary control. A list of countries is displayed.
3. To set for the UK, use the Navigation/Select rotary control to highlight Europe and press
to Select.
4. Use the Navigation/Select rotary control to highlight United Kingdom and press to
Select.
5. Use the Navigation/Select rotary control to highlight England, Northern Ireland, Scotland
or Wales as required, and press to Select.
6. Use the Navigation/Select rotary control to highlight a Town and press to Select. The
current weather information will be displayed. You can use the Navigation/Select rotary
to scroll through the available weather information.
7. Your radio will now switch between the Weather information and the current date and
time when in Standby mode.
Change the mode
Short press the Mode button to change the mode, there are 3 options available: Internet
Radio, Bluetooth and UPnP.
Adjusting the volume
• Turn clockwise to increase the volume.
• Turn anti-clockwise to decrease the volume.
or button. 'Set location (Weather) is displayed.
10