Extel MINI 2016 Guide D'installation Et D'utilisation page 59

Sweep frequency
Hz.
- Select the monitor sweep frequency (50Hz or 60 Hz) using the left/right keys and validate using the
OK key.
- This parameter is used to change the image display frequency on the monitor to avoid fl ashing image
problems (neon lighting, electric or magnetic disturbance, etc.)
- Press the key to exit from the setting
Information on the device software version.
- Press the key to exit from the setting
Memory card formatting
FORMAT.
- Press OK to confi rm the formatting of the micro SD memory card. When the memory card is format-
ted all data on it is permanently deleted, including the recorded passage videos.
- Press the key to exit without formatting
Reset
RESET
- Press the OK key to restore the default settings (factory settings).
- Press the key to go back
Pairing
- Press OK to access the pairing function
- Press OK to start the pairing process. You then have 30 seconds to keep the pairing button located
inside the electronic control box pressed for 5 seconds (4 fi g.5).
- Release the button when the LED located inside the electronic control box fl ashes.
- The system confi rms the success or failure of the pairing.
CFI EXTEL MINI - 10/2016
GB8