Extel MINI 2016 Guide D'installation Et D'utilisation page 58

Settings
Chime time
- You can set the time the chime lasts: 30, 60, 90 or 180 seconds.
- Select the required time and press OK to validate.
Conversation time setting
- You can set how long an answered call lasts: 30, 60, 90 or 180 seconds.
- Select the required time and press OK to validate.
- To end a conversation before the allotted time, press
AUTO
Passage memory (function only valid if a micro SD card is present)
- This function is used to enable the automatic recording of calls. The recording lasts 30 seconds.
- Select ON using the left/right keys to enable the function and OFF to disable it, then press OK to
validate.
Date and time setting
18 18 18
- Use the left/right keys to select the value to change and press OK to select it
- Modify the value using the up/down keys and press OK to validate.
- To exit from this menu, press the
Brightness setting
- Use the left/right keys to adjust the brightness and validate using the OK key.
Setting the conversation volume on the monitor
- Use the left/right keys to adjust the monitor speaker volume and validate using the OK key.
Setting the chime volume
- Use the left/right directional keys to adjust the chime volume and validate using the OK key.
Setting the monitor standby
- Use the left/right keys to select the time before the monitor switches to standby mode and validate
using the OK key.
GB7
AUTO
18 18
key (2 fi g 2).
CFI EXTEL MINI - 10/2016
Hz.
again.
FORMAT.
RESET