Electronic Control Box; Options; Technical Support - Warranty - Extel MINI 2016 Guide D'installation Et D'utilisation

9. OPTIONS

• All Extel electric door openers
• All Extel electric locks
• All Extel motors
• 12V power supply~ WETR14602 SER.R1
• Micro SD card (SD or SDHC type)
10. TECHNICAL SUPPORT - WARRANTY
Fault
• No functions
• The monitor
and the outside station
do not ring
There is no sound
between the inside and
the outside
• Impossible to record
on the SD card
If required, our technical site is at your disposal: www.cfi-extel.com
The latest version of the instructions in colour is downloadable from:
WARRANTY TERMS
The warranty does not cover: consumables (batteries, etc.) and damage caused by: incorrect use, incorrect instal-
lation, third party intervention, deterioration through physical impact or electric shock, dropping, or atmospheric
phenomena.
• Do not open the appliance as this will void the warranty.
• When returning the appliance for eventual servicing, protect the screen to avoid scratches.
• Clean using a soft cloth only, do not use solvents. The guarantee is void if parts have been dismantled. Before
cleaning, disconnect or power off the appliance.
• Only use original replacement parts.
Caution: Do not use any carboxylic acid, alcohol-based or other similar product or solvent. In addition to
the risk of damage to your device, fumes are also dangerous to health and are explosive.
Do not use any tool which may conduct electricity (metal brush, pointed tool or other) to clean the equipment.
The shop receipt or invoice is the proof of the purchase date.
Cause
• No power supply
• Pairing problem.
• Range problem.
• Microphone hole blocked by an
insect
• Protection problem
This appliance has a parts and labour warranty in our workshops.
CFI EXTEL MINI - 10/2016
Solution
• Check that the adapter is connected or the
monitor battery is charged
• Check that the monitor is powered on and
correctly lit (orange led)
- Check the voltage of the batteries in the

electronic control box

• Pair the electronic box to the monitor.
• Bring the monitor closer to the electronic
box.
• Gently unblock and clean the hole (be careful
not to damage the microphone cell)
• Check the connection of the white or brown
wire on the outside station
• Check that the card is not locked or full
• Carry out a format
www.cfi-extel.com
GB10