Accessories - Genesis GMT25T Manuel D'utilisation

NOTE:
It is suggested that you have a piece of
scrap material supporting the blade when making a
flush cut. If you need to rest the blade on a delicate
surface, you need to use cardboard or masking tape
to protect the surface.
use the segmented saw blade for making continuous precise cuts
in wood, plastic or drywall material. Applications include: cutting
openings for electrical boxes, repairing flooring, cutting flooring for
venting, and more. See FIG 6 for an example of how to use the
segmented saw blade.
SANDING (FIG 7)
using sanding accessories, this tool is a detail sander. It is suitable
for dry sanding of wood, plastic, and metal surfaces, especially in
corners, edges and hard to reach areas. See FIG 7.
Tips:
1. Work with the complete surface of the sandpaper, not only with
the tip.
2. Sand with continuous motion and light pressure. Do not apply
excessive pressure. Let the tool do the work.
3. Always secure small work pieces.
4. Select suitable abrasive paper for best results.
SCRAPING (FIG 8)
Scraper blades are suitable for removing vinyl, varnish, paint layers,
carpeting, caulk and other adhesives.
use a rigid scraper blade to remove harder materials, such as vinyl
flooring, carpeting and tile adhesives in a large area.
use a flexible scraper blade (not included) to remove softer material
such as caulk.
Tips:
1. When removing strong, tacky adhesive, grease the scraper
blade surface to reduce gumming up.
2. Begin with light pressure. The oscillating motion of accessory
only occurs when pressure is applied to the material to be
removed.
3. If you are removing caulk from a delicate surface, such as a
bath tub or tile back splash, we recommend taping to protect
the surface that the blade will rest on.
GROUT REMOVAL (FIG 9)
use a grout removal blade (not included) to remove damaged or
cracked grout, or in order to replace a damaged or broken tile.
To remove the grout, use a back and forth motion, making several
passes along the grout line. Be careful not to apply too much side
pressure on the grout blade. See FIG 9.

ACCESSORIES

Recommended accessories for this tool are the GENESIS™ Universal Quick-Fit
oscillating tool accessories. Please refer to the "Genesis Oscillating Tool Accessory
Reference Guide" enclosed for details.
FIG 7
FIG 8
FIG 9
FIG 5
FIG 6
9