Accessories - Genesis GLMT08B Manuel D'utilisation

SANDING (FIG 7)
With sanding accessories, this tool is a detail sander. It is suitable
for dry sanding of wood, plastic, and metal surfaces, especially in
corners, edges and hard to reach areas. See FIG 7
Tips
1. Work with the complete surface of the sandpaper, not only with
the tip.
2. Sand with continuous motion and light pressure. Do not apply
excessive pressure. Let the tool do the work.
3. Always secure small work pieces.
4. Select suitable abrasive paper for best results.
SCRAPING (FIG 8)
Scraper blades are suitable for removing vinyl, varnish, paint
layers, carpeting, caulk and other adhesives.
use a rigid scraper blade to remove harder materials, such as
vinyl flooring, carpeting and tile adhesives in large areas.
use a flexible scraper blade to remove softer material such as caulk.
Tips
1. When removing strong, tacky adhesive, grease the scraper blade surface to reduce gumming up.
2. Begin with light pressure. The oscillating motion of the accessory only occurs when pressure is applied to the
material to be removed.
3. If you are removing caulk from a delicate surface, such as a bath tub or tile back splash, we recommend taping
to protect the surface that the blade will rest on.
GROUT REMOVAL
use a grout removal blade to remove damaged or cracked grout, or in order to replace a damaged or broken tile.
To remove the grout, use a back and forth motion, making several passes along the grout line. Be careful not to
apply too much side pressure on the grout blade.

ACCESSOrIES

This tool is compatible with all GENESIS™ oscillating tool accessories.
Please refer to "Genesis Oscillating Tool Accessory reference Guide" Sheet for details.
10
8V Lithium-ion Oscillating Tool
Operator's Manual GLMT08B
FIG 7
FIG 8