Disposal And Recycling; Ec-Declaration Of Conformity - Batavia DUO BT-CSD002 Mode D'emploi

A warning:
• that the vibration emission during actual
use of the power tool can differ from the
declared total value depending on the ways
in which the tool is used; and
• of the need to identify safety measures to
protect the operator that are based on an
estimation of exposure in the actual
conditions of use (taking account of all
parts of the operating cycle such as the
times when the tool is switched off and
when it is running idle in addition to the
trigger time).

DISPOSAL AND RECYCLING

Do not dispose of electric power
tools with domestic refuse.
The tool is shipped in packaging to reduce
transport damage. This packaging is a raw
material and as such can either be reused or
can be fed back into the raw material cycle.
The tool and its accessories are made from
various materials such as metals and
plastics. Take defective components to a
special refuse collection point. Ask about
these at your specialist shop or local council.
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.
7061166 Ma # 1201-09.indd 17

EC-Declaration of conformity

We, the Batavia GmbH, Blankenstein 180,
NL-7943PE Meppel, declare by our own
responsibility that the product Cordless
screwdriver, Item-No 7061166, Model Nr.
BT-CSD002 is according to the basic
requirements, which are defined in the
European Directives Electromagnetic
Compatibility 2004/108/EC (EMC),
2006/95/EC Low Voltage Directive (LVD)
and their amendments. For the evaluation of
conformity, the following harmonized
standards were consulted:
EN 55014-1, EN 55014-2, EN 60745-1,
EN 60745-2-2, EN 61000-3-2, EN 61000-3-3,
EN 61000-6-3
Meppel, 01 november 2011
Name and address of the person authorised
to compile the technical file, who must be
established in the Community;
Meino Seinen, QA Director
Batavia GmbH, Blankenstein 180,
7943 PE Meppel, The Netherlands
EN
17
09-01-12 12:29