Intended Use; Before First Use; Charging The Flash Cell Screwdriver - Batavia DUO BT-CSD002 Mode D'emploi

charger, cable and plug. If damage is
detected, do not use the battery charger.
Never open the battery charger yourself.
Have repairs performed only by a qualified
technician and only using original spare
parts. Damaged battery chargers, cables
and plugs increase the risk of an electric
shock.
d) Do not operate the battery charger on
easily inflammable surfaces (e. g., paper,
textiles, etc.) or surroundings. The
heating of the battery charger during the
charging process can pose a fire hazard.
e) Supervise children. This will ensure that
children do not play with the charger.
f) Children or persons that owing to their
physical, sensory or mental limitations
or to their lack of experience or
knowledge, are not capable of securely
operating the charger, may only use this
charger under supervision or after
having been instructed by a responsible
person. Otherwise, there is danger of
operating errors and injuries.
SAFETY WARNINGS FOR SCREWDRIVER
• Hold power tool by insulated gripping
surfaces, when performing an
operation where the fastener may
contact hidden wiring. Fasteners
contacting a "live" wire may make
exposed metal parts of the power tool
"live" and could give the operator an
electric shock.
• Hold the machine with a firm grip. High
reaction torque can briefly occur while
driving in and loosening screws.
• Always wait until the machine has
come to a complete stop before
placing it down. The tool insert can jam
and lead to loss of control over the power
tool.
• Before any work on the machine (e. g.,
maintenance, tool change, etc.) as
well as during transport and storage,
14
7061166 Ma # 1201-09.indd 14
TM
set the rotational direction switch to
the centre position. Unintentional
actuation of the On/Off switch can lead to
injuries.
• Protect the power tool against heat,
e. g., against continuous intense
sunlight, fire, water, and moisture.
Danger of explosion.
• In case of damage and improper use
of the battery, vapours may be
emitted. Provide for fresh air and seek
medical help in case of complaints. The
vapours can irritate the respiratory system.

INTENDED USE

• This flash cell screwdriver has been
developed for private use. It is not designed
for the demands of industrial use.
• The device is intended for driving in and
loosening screws in wood, metal, ceramic
and plastic.
• The intended use also includes an operation
following the operating instructions.
• Any use beyond these parameters (different
media, applying force) or any changes
(reconstruction, no original accessory) can
lead to serious risks and is regarded as use
that is contrary to the intended purpose.
• Note: this charger is not suitable for
charging non-rechargeable batteries.

BEFORE FIRST USE

• Remove the cordless screwdriver and the
accessory out of the packaging.
• Check all parts for damage in transit and do
not use damaged accessory or a damaged
tool.
• Keep packaging materials out of reach of
children. There is risk of suffocation!
CHARGING THE FLASH CELL
SCREWDRIVER
The outstanding feature of this cordless
screwdriver is very quick charging technology.
The screwdriver's flash cell already is fully
09-01-12 12:29