Batavia DUO BT-CSD002 Mode D'emploi page 13

4. Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be
repaired.
c) Disconnect the plug from the power
source before making any
adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tools operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with these
instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from intended could
result in a hazardous situation.
7061166 Ma # 1201-09.indd 13
5. Battery tool use and care
a) Recharge only with the charger
specified by the manufacturer. A charger
that is suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
b. Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
c. When battery pack is not in use, keep it
away from other metal objects, like
paper clips, coins, keys, nails, screws or
other small metal objects, that can make
a connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire.
d. Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes,
additionally seek medical help. Liquid
ejected from the battery may cause
irritations or burns.
6. Service
a) Please use a qualified expert who
uses original replacement parts to
repair your power tool. This will ensure
proper functioning of the power tool.
7. Safety warnings for battery chargers
Keep the battery charger away from rain
or moisture. Penetration of water in the
battery charger increases the risk of an
electric shock.
a) Only charge lithium ion batteries or
batteries installed in Batavia products
with the voltages listed in the technical
data. Otherwise there is danger of fire and
explosion.
b) Keep the battery charger clean.
Contamination can lead to danger of an
electric shock.
c) Before each use, check the battery
EN
13
09-01-12 12:29