AutoAqua Smart AWC Duo SAWC-400P Mode D'emploi page 7

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2. ATO (Auto Top Off)
In freshwater mode,
ATO operates with pump 1.
Step 1 :
Mount the blue sensor
( ) at normal water level
S1
(with the lower sensor
indicating the water
level) on the tank/sump
with the
*Please avoid setting up the sensor in an area with micro bubbles
or direct light.
Step 3 :
Connect ATO
lling pump
to P1.
Step 2 :
Connect ATO lling tube
( pump
*Note : Place siphon break inside the tank/sump but above the
Air In :
Air In
Water Out :
Water Out
magnet.*
siphon break*
tubing holder).
Tank/Sump
water level.
Siphon break allows air in to break the siphon when the
pump turns off.
Water drops out of the hole are normal when the pump is on.
Tank/Sump
Arrow on siphon break
indicates water ow direction.
ATOFillingPump
ATOReservoir
6
English

Publicité

Table des Matières
loading

Table des Matières