AutoAqua Smart AWC Duo SAWC-400P Mode D'emploi page 13

Alarm and Reminder
Status
ashes with
the audible alert
ashes with
the audible alert
&
ashes with
the audible alert
&
ashes with
the audible alert
shows
shows
* Touching or
again to resume the process.
** For very small aquariums, it's normal that the failsafe sensor may
be triggered after each lling/draining.
*** If there are two alarms triggered at the same time, touching
or once will dismiss one alarm only.
Description
1. ATO pump is not connected.
2. ATO pump malfunctions.
Quick Security Technology
(QST) alarm
Please refer to page 13 for
further details.
Pump pauses over 10 minutes.
Timer pauses over 10 minutes.
The High Level Failsafe Sensor
detects water.**
The Low Level Failsafe Sensor
detects no water.**
will dismiss the alarm only. Please touch
1. Connect the pump cable.
2. Replace the pump.
1. Touch
the alarm.
2. Verify the root cause.
Empty Reservoir
Bubble Noise
Sensor is not clean.
Pump Failure
Touch
the alarm.*
Touch
the alarm.*
Touch
the alarm.
Touch
the alarm.
12
English
Action
or to dismiss
or to dismiss
or to dismiss
or to dismiss
or to dismiss
or