AutoAqua Smart AWC Duo SAWC-400P Mode D'emploi page 5

Step 7 :
Connect power adapter.
Waste
Water
Waste
Water
Container
ii. Freshwater Aquarium
For Freshwater aquariums, P3 is not required.
Step 1 :
Mount the blue sensor
( ) at normal water level S1
– ATO water level (with
the lower sensor
indicating the water
level) on the tank/sump
with the magnet.*
*Please avoid setting up the sensor in an area with micro bubbles
or direct light.
Power
AWC
Drain
Pump
Tank/Sump
Water
Change
Volume
Tank/Sump
4
Step 6 :
Connect AWC lling pump to P3.
Step 5 :
Connect AWC lling
tube ( pump
break
AWC
Filling
Pump
New
Water
Reservoir
Step 2 :
Mount the green sensor
( ) at low water level S2
(with the top sensor
indicating the water
level) on the tank/sump
with the
English
siphon
tubing holder).
magnet.*