AutoAqua Smart AWC Duo SAWC-400P Mode D'emploi page 10

Icons & Buttons for Setting
1
No.
1
2
3
4
5
6
7
*During water change process, pressing
and return to the previous AWC MANUAL/AUTO setting page. Also,
ATO is forced to be turned off if its previous status is on and at the
same time the controller gives a ve-second audible and visual alert
( ashing).
2 3 4
Turn ATO on or off
Choose AWC MANUAL / AUTO mode or
turn AWC off
1. Start / pause / resume the AWC process
2. Dismiss alarm
Choose the setting item in the AWC MANUAL /
AUTO mode
1. Increase day / hour
2. Choose Saltwater / Freshwater mode
1. Decrease day / hour
2. Choose Saltwater / Freshwater mode
1. Wake up the display
2. Dismiss alarm
3. Resume AWC process
4. Return to AWC setting page*
5. Reset (hold at least for 8 seconds until the
display goes black)
5
6
can stop the process
9
English
7