AutoAqua Smart AWC Duo SAWC-400P Mode D'emploi page 15

Power Outage Security Measures
1. When the power outage occurs during the water change process,
the process will be delayed for 1 minute after restoration of power
and then resumes. The pump icon will ash during the delay.
2. When the power outage occurs during the countdown, the timer
will pause during power outage.* It will retain the record and
resume after power outage automatically.
* Since the timer is not running during a power outage, the next
water change process will be delayed.
For example, a power outage occurs when the display shows 00:08.
After Smart AWC Duo is powered on again, the countdown will
start from 00:08.
Specifications
1. Power Input : 100-240 VAC 50-60 Hz
2. DC Pump :
• Head : 8.2 feet (250 cm)
• Flow Rate : 74 gph (280 lph)
3. Max. Mounting Thickness : 1/2 inch (12.7 mm)
4. Water Change Interval :
• Minimum : 1 hour
• Maximum : 99 days
Notice
1. Please read the manual in detail before installation.
2. If using another ATO instead of the built-in ATO, please turn off
your ATO before AWC starts.
3. Avoid setting up the sensors in an area with micro bubbles and
direct light.
4. Please keep the controller away from water and make sure the
pump connections are dry before plugging in.
14
English