ZANKER KDT11002FK Notice D'utilisation page 18

German
degrees
(°dH)
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
Electronic adjustment
1. Press the on/off button to activate the appliance.
2. If necessary, do the Reset function.
3. Press and hold the programme button until the
programme indicator
the programme indicator
with fixed light.
4. Wait until the programme indicator
goes off and the end indicator starts to flash. The
programme indicator
5. Press the programme button. The end indicator
starts to flash. The intermittent flashing of the end
indicator refers to the current set level.
• E.g. 5 flashes + pause + 5 flashes = level 5.
6. Press the programme button again and again to
change the setting. Each time you press the pro-
gramme button the level number increases.
7. Press the on/off button to deactivate the appliance
and to confirm the setting.
Filling the salt container
Caution! Water and salt can come out from the
salt container when you fill it. Risk of corrosion.
To prevent it, after you fill the salt container, start a
programme.
18
Water hardness
French mmol/l
degrees
(°fH)
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
< 7 < 0.7
starts to flash and
comes on
continues to flash.
Clarke
degrees
23 - 27
18 - 22
13 - 17
5 - 12
< 5
1
3
Put 1 litre of water in the salt container (only for the
first time).
Water softener
adjustment
Level
1)
5
4
3
2
2)
1
2
4