Siemens TQ505DF8 Notice D'utilisation page 67

Clean and insert the milk con-
1.
tainer.
Rinse out the water tank.
2.
Fill the water tank with fresh, non-
3.
carbonated water up to the "max"
marking.
Press ⁠ .
4.
a The appliance will rinse itself for
approx. 2 minutes.
Empty and clean the drip tray.
5.
Insert the drip tray and close the
6.
door.
Restart the service programme.
7.
Using the milk system cleaning
programme
Rinse the milk system with water, if
necessary. The rinsing process takes
approx. 1 minute.
Press
1.
Use and
2.
ing and care" and press
Use and
3.
system" and press
To start the programme, press
4.
a The display will guide you through
the programme.
Remove and empty the milk con-
5.
tainer.
Clean the milk container, milk tube
6.
and suction pipe.
Fit the components and insert the
7.
milk container.
Place an empty glass under the
8.
outlet system and press
The milk system will now clean it-
self automatically.
a The program has ended and the
appliance is ready for operation.
Tip: If you want to clean the milk sys-
tem particularly thoroughly, clean it
regularly by hand.
→ "Cleaning the milk system",
Page 64
⁠ .
to select "Clean-
⁠ .
to select "Milk
⁠ .
⁠ .
Using the descaling programme
Run the descaling programme when
your appliance prompts you. The pro-
cess takes approx. 30 minutes.
Requirement: The brewing unit is
cleaned.
→ "Cleaning brewing unit", Page 65
Press
1.
Use
2.
ing and care" and press
Use
3.
scale" and press
To start the programme, press
4.
a The display will guide you through
the programme.
Empty and insert the drip tray.
5.
Remove and empty the milk con-
6.
tainer.
Clean the milk container, milk tube
7.
and suction pipe.
Fit the components and insert the
8.
milk container.
If there is a water filter, remove it.
9.
Press
10.
⁠ .
Empty the water tank.
11.
Fill a container with 0.5 l lukewarm
12.
water.
Add a Siemens descaling tablet to
13.
the water and stir until the tablet is
fully dissolved.
Pour the descaling solution into
14.
the water tank up to the calc mark
and press
Place the empty container under
15.
the outlet system and press
a The descaling programme will run
for approx. 20 minutes.
Rinse the water tank.
16.
Press
17.
If there is a water filter, insert the
18.
water filter.
→ "Inserting and activating the wa-
ter filter", Page 60
Press
19.
Cleaning and servicing en
⁠ .
and to select "Clean-
and to select "De-
⁠ .
⁠ .
⁠ .
⁠ .
⁠ .
⁠ .
⁠ .
⁠ .
67