Taking Photos And Videos; Internal Storage; Wifi Connection - Liemke LUCHS–1 Mode D'emploi

09. TAKING PHOTOS AND VIDEOS

> Click the DOWN button for taking a Photo.
A symbol will appear briefly on the screen indicationg the successful recording of the
image.
> Long press the DOWN button for starting video recording.
A recording symbol with recording time appears on the screen while the device is
recording.
> Long press the DOWN button again to stop recording.
Photo taking is disabled during video recording.
Note: In Basic Mode, photo and video recording is disabled. In Custom Mode, photo
and video functions may be enabled or disabled based on the settings in the Input
Mode Custom menu.
Note: Photos and videos can only be taken from 20 seconds after starting the device.

10. INTERNAL STORAGE

The LUCHS -1 has 32 GB of built-in memory and can be connected to a computer as a
mass storage device. Connect the device to your computer with the supplied USB-C
cable. The device will show up as a mass storage media and allow access to the stored
photo and video files.

11. WIFI CONNECTION

> To establish a Wifi connection with your smartphone or tablet, activate Wifi in the
menu. The Wifi symbol is shown in the top center of the screen when Wifi is activated.
Note: Wifi can only be started 30 seconds after starting the device.
The LUCHS -1 will show up on the list of Wifi networks on your mobile device as "LUCHS_
XXXXXX". The default password for connecting with the LUCHS -1 Wifi is "12345678".
See www.liemke.com/APP for information about the Liemke APP.
LUCHS -1 · Operating Manual 09 / 2021
E
N
36
–
37