Select Cycle - Maytag MVWB965HW Guide D'utilisation Et D'entretien

8.

Select cycle

Turn the cycle knob to choose your
wash cycle. For more information,
see the "Cycle Guide."
Estimated Time Remaining will
light up with a cycle time. You
may notice time adjusting during
the cycle. This is normal.
If you do not want to begin a cycle immediately, you may
choose Delay Start option.
To choose a delay time:
1. Touch DELAY START button to select desired delay time.
Time will increase in hour increments up to 12 hours.
2. Touch and hold the START/PAUSE button to start delay
start time.
IMPORTANT: When delaying a cycle, use liquid HE detergent
only in the dispenser. Powdered detergents may absorb
moisture from a previous cycle and clump before the wash
cycle begins.
To cancel Delay Start:
1. Touch POWER to cancel Delay Start.
To pause Delay Start:
1. Touch the START/PAUSE button to pause Delay Start.
2. Touch and hold the START/PAUSE button again to start
Delay Start time.
12
9.
Select cycle modifiers
Once you select a cycle, the default modifiers or the previous
set modifiers for that cycle will be lit. Touch the cycle settings
buttons to change the Temperature, Soil Level, and Spin Speed,
if desired. Not all settings are available with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your items. If not sure which temperature
to use, refer to the chart below or select a cooler temperature.
Temperature suggestions
NOTE: Even for cold wash settings, some warm water may
be added to the washer to maintain a minimum temperature.
Light soils Moderate Heavy Soils
soils
Colors that
bleed Bright colors
or fade
Whites
Pastels