Maintenance; Maintenance Warnings; Acrylic Maintenance; Maintenance In Periods Of Non-Use Or Absence - Iberspa Oasis 40 Manuel D'utilisation Et D'installation

6. MAINTENANCE

6.1. Maintenance warnings

• Before proceeding to carry out any electrical or mechanical intervention, please ensure
the machine is disconnected from the power supply network and that the start up devices
are blocked.
• Do not handle the equipment withwet feet.

6.2. Acrylic maintenance

Easy care for an elegant surface:
• Use common cleaners for general use. For normal care and cleaning, use a soft cloth
or sponge with a little soap and water. Rinse it well, and dry with a clean, dry cloth. If you
are using a household cleaner, please ensure it is recommended for acrylic surfaces by
the manufacturer.
• Never use abrasive cleaners.
• Do not allow the acrylic surface to come into contact with ketones or esters such as
acetone, acetates (such as nail varnish remover, nail varnish or dry cleaning substances)
or any organic solvent with chlorine, varnishes, petrol, aromatic solvents, etc.
• Remove dust, smears and dry dirt with a soft, moist cloth.
• Clean off grease, oil, paint and ink stains with isopropyl alcohol and dry it with a clean,
dry cloth.
• Avoid using razors or any other kind of sharp instrument that could scratch the surface.
Small scratches can be removed by applying a fine layer of automotive varnish and lightly
polishing it with a clean cloth.
Once a week, clean the area of the Spa which is not underwater with a quality polish for
Spas.
ATTENTION
Remember to never leave the Spa uncovered, empty and exposed to the sun,
as it could cause damages that the warranty does not cover.

6.3. Maintenance in periods of non-use or absence

SHORT PERIODS (3-5 days)
• Adjust the pH and treat the water (see Water Maintenance section).
• Cover the spa.
• Before using the Spa again, readjust the pH and treat the water again.
ENG
39