Air Massage Circuit; Air Circuit; Handling And Locating The Spa - Iberspa Oasis 40 Manuel D'utilisation Et D'installation

AIR MASSAGE CIRCUIT

• BLOWER PUMP
Continued use blower pump for Compact Kit in public use installations. They operate
with a 400 V AC III electrical supply as standard.

• AIR CIRCUIT

The mission of the air circuit is to return air from the blower pump to the Spa. The air
is distributed inside the Spa via a series of blowing nozzles located on the floor or on
the seats of the Spa.

3.3 Handling and locating the spa

• Handling of the Spa must be done very carefully and in a controlled manner by several
persons.
• The Spa must never be hold by the pipes.
• The Spa should be installed following the criteria below.
• No material should be used or located below the Spa and around it (in a minimum
perimeter of one meter) unless it is completely resistant to humidity and water. The Spa
warranty does not cover any damage to materials, decorative or ornamental objects that
may deteriorate due to flooding or atmospheric humidity.
• The Spa must be located in a duly adapted space which is adequate for withstanding
significant damp and condensation. If this is not so, the warranty will not cover material or
personal damages.
20
6
5
3
4
2
1
1 Air suction
2 Blower pump
3 Air return circuit
4 Protection siphon
5 Check valve
6 Air injection nozzles
109