Introduction; Important; Warnings And Preventive Measures - Iberspa Oasis 40 Manuel D'utilisation Et D'installation

ENG

1. INTRODUCTION

This manual contains all the necessary information for fully enjoying your Spa.We suggest
you take some time to go over the points below.
The Spa is an element designed especially for bathrooms, offering a bath/massage
combination.
It consists of a closed water circuit powered by pumps which, combined with air, produce
a relaxing massaging effect on your body.
For the massage bath to be effective, the water in the circuit must be at a temperature of
between 34ºC and 37ºC, which is achieved by means of an electric heat exchanger.
If you have any questions or queries regarding the operation or maintenance of this
product, contact the installer or your local distributor. They are specialised professionals
and their knowledge will make things easier for you and will help you to enjoy this product.
IMPORTANT: The manufacturer reserves the right to change part of the designs or
specifications without prior notice and without incurring in any obligations.

2. WARNINGS AND PREVENTIVE MEASURES

• Take all precautions to avoid unauthorised access of children inside the Spa. In order to
avoid accidents, ensure children are supervised by an adult at all times. Control entering
and exiting the Spa in order to avoid slips due to wet surfaces.
• Do not allowanyone to play inside the Spa with metal or sharp objects that could
damage the acrylic surface.
• Make sure that bathers cannot access any of the Spa's electrical components.
• Do not turn on the machine without there beingwater inside the Spa.
• Do not use electrical devices such as radios or dryers inside the Spa.
• Always keep the minimum water level indicated in the skimmer (in the case of private
use Spas) or that indicated in the level probes of the surge tank in the case of public use
Spas.
13