Remote Control (Spa Buttons); Water Massage Pump(S) Remote Activation - Iberspa Oasis 40 Manuel D'utilisation Et D'installation

5.2. Remote control (Spa buttons)

The pumps can be activated from the spa if the appropriate switches are installed. Each
switch can control one or more pumps at once. Depending on the system's configuration.
• By pressing the corresponding switch the pump begins to operate and does not
stop until the time programmed in parameter d1 (Units and Massage Setting Menu) is
completed or the switch is pressed again.
• If the parameter d2 has been programmed with a value greater than 0 the pump may not
be activated until this time has elapsed.
• Massage and inhibition time are independent for each switch.
127
Air massage pump(s) Water massage Light (option)
remote activation pump(s) remote
activation
38