Additional Safety Rules For Scroll Saws - PEUGEOT Energyscroll 400 Manuel D'utilisation

Table des Matières

Les langues disponibles

17. Avoid unintentional starting. Ensure switch is in "off" position when plugging in.

18. Use outdoor extension leads. When the tool is used outdoors, use only extension leads intended for outdoor use and so

marked.

19. Stay alert. Watch what you are doing, use common sense and do not operate the tool when you are tired.

20. Check damaged parts. Before further use of the tool, it should be carefully checked to determine that it will operate

properly and perform its intended function. Check the alignment of moving parts, binding of moving parts, breakage of

parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be

properly repaired or replaced by an authorized service centre unless otherwise indicated in this instruction manual. Do not

use the tool if the switch does not turn it on and off.

21. WARNING. The use of any accessory or attachment other than one recommended in this instruction manual may present a

risk of personal injury.

22. Have your tool repaired by a qualified person. This electric tool complies with the relevant safety rules. Repairs should only

be carried out by a qualified person using original spare parts, otherwise this may result in considerable danger to the user.

This scroll saws is designed to saw the wood or wood-like products only. Sawing other materials could result in fire,

injury or damage to the workpiece.

2. This scroll saw is intended for use in dry conditions, and for indoor use only.

3. Do not cut pieces of material narrower than 75mm wide to hold by hand outside the blade guard.

4. Avoid awkward hand positions where a sudden slip could cause a hand to move into the blade.

5. Always use the blade guard to avoid possible injury due to blade breakage.

6. Never leave the scroll saw work area with the power on, or before the machine has come to a complete stop.

Do not perform layout, assembly or set up work on the table while the cutting tool is in operation.

8. Never turn your scroll saw on before clearing the table of all objects: (tools, scraps of wood, etc.) except for the workpiece and

related feed or support devices for the operation planned.

Do not reach the upper arm.

10. Never use the scroll saw near flammable liquids, vapors, or gases.

11. Keep the saw with proper footing on a table to decrease noise and vibration.

SYMBOLS

V..................volts

Hz...............hertz

min.............minutes

h..................hours

I....................ON

min¯¹..........revolutions per minute

Wear safety goggles.

Wear ear protection.

Wear a breathing mask.

Read the manual.

WARNING ! To reduce the risk of injury, user must read instruction manual.

Warning! Noise can be a health hazard. When the noise level exceeds 80dB(a), be sure to wear ear protection.

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your

local government for information regarding the collection systems available. If electrical appliances are disposed of in

landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your

health and wellbeing. When replacing old appliances with new once, the retailer is legally obligated to take back your

old appliance for disposal at least for free of charge. Disposal of discarded material shall be in accordance with local

environmental regulations.