Features; Assembly - RIDGID R2401 Manuel D'utilisation

FEATURES

PRODUCT SPECIFICATIONS
Collet ......................................................................... 1/4 in.
No Load Speed .................................... 20,000-30,000/min.
Input ............................................... 120 V, 5.5 Amps, 60 Hz
kNOW YOUR TRIM ROUTER
See Figure 1, page 14.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
SLIDE SWITCH
The slide switch is located on top of the motor housing.
The slide switch features a soft start to prolong motor life
and gives the operator more control when starting the trim
router.
VARIABLE SPEED DIAL
The variable speed dial, located on the front of the motor
housing, enables you to adjust the speed of the bit from
20,000/min to 30,000/min.
LIGHTED PLUG
The lighted plug with tool icon helps to easily identify live
tools.
MOTOR
The trim router has a powerful 5.5 amp permanent magnet
motor with sufficient power to handle many trimming jobs.
DEPTH SCALE
The trim router has a convenient depth scale located on the
side of the motor housing.
EDGE GUIDE
The edge guide will keep the bit a certain distance from the
edge of a straight workpiece.

ASSEMBLY

UNPACkING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNING:
Do not use this product if any parts on the Packing
List are already assembled to your product when
you unpack it. Parts on this list are not assembled
to the product by the manufacturer and require
customer installation. Use of a product that may
have been improperly assembled could result in
serious personal injury.
Switch ......................................................................... Slide
Cord Length ................................................................ 12 ft.
Net Weight ...............................................................3.8 lbs.
SPINDLE LOCk
A spindle lock secures the spindle so that only one wrench
is needed to loosen collet nut and change cutters.
MICRO-DEPTH ADjUSTMENT
WITH zERO RESET
The micro-depth control adjustment with zero reset feature
makes precise depth of cut changes possible.
SqUARE SUBBASE
The square subbase makes it easier to work with a straight
edge.
LED WORkLIGHT
The LED worklight helps provide additional light for a clearer
view of the cutting area.
MOTOR RELEASE LEVER
The trim router has a motor release lever that makes large
depth of cut adjustments quick and easy.
OVERMOLDED GRIP AREA
The grip area is overmolded for improved grip and comfort.
REMOVABLE BASE
The removable base allows for greater access to the collet nut.
ROUND SUBBASE
The round subbase makes it easier to rotate the tool when
trimming with a guide.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACkING LIST
Trim router with round subbase
Wrenches (2)
Edge Guide
Guide Bars (2)
Bearing Flush Trim Bit
Tool Bag
Square Subbase
Operator's Manual
7 - English