Before You Begin; Tools And Parts Needed; Parts Included; Cabinet Requirements - Gaggenau VG 295 CA Notice De Montage

Before you begin

Tools and parts needed

▯
Phillips Head Screwdriver
▯
Pencil
▯
Drill with ¼" (6 mm) bit
▯
Jigsaw
▯
Tape Measure
Note: Additional materials may be necessary for
installation in solid surface countertops. Contact the
countertop manufacturer.

Parts included

B e f o r e y o u b e g i n

Cabinet Requirements

The minimum spaces that must be maintained when
installing the gas cooktop shall be:
A minimum 12" (300 mm)
minimum 12" (300 mm)
B
C minimum 30" (762 mm) clearance between the top
of the cooking surface and the bottom of the
ventilation hood
minimum 1 / " (40 mm)
D 9
16
E minimum 24" (600 mm)
minimum 18" (460 mm)
F
The distance from the top of the cooktop to the bottom
of cabinets above can be reduced to 24" when the
bottom of the wood or metal cabinet is protected by not
less than ¼" (6.35 mm)-thick flame-retardant millboard
covered with not less than No. 28 MSG sheet metal,
0.015 inch (0.4 mm) stainless steel, 0.024 inch (0.6 mm)
aluminium or copper.
7