Connecting The Hifd Drive; Disconnecting The Hifd Drive - Sony SFD-FW200P Mode D'emploi

The Utility Program

Connecting the HiFD drive

Disconnecting the HiFD drive

20
If PC was booted with HiFD drive unplugged, "HiFD Connect-
iT" may be used to cause Windows to recognize the drive.
1
Run "HiFD Connect-iT".
2
Click the [Connect] tab, and click [Connect] button.
[Connected] appears in the [Device] of [Properties] box.
To remove the HiFD drive without shutting down the PC,
perform the same steps as above, except instead of selecting
[Connect] button, select [Disconnect].