Connecting The Unit To A Personal Computer - Sony MSAC-US2 Mode D'emploi

For Windows (continued)
12
Click "Install."
The installation begins. You may see "Installing Microsoft DirectX"
displayed.
13
Confirm that the DirectX setup screen is displayed, then click
"OK."
The computer will be restarted.
The "PIXELA ImageMixer for Sony" will be enabled after you reboot
your computer.
14
Remove the CD-ROM from the CD-ROM drive.

Connecting the unit to a personal computer

Connect the USB plug of this unit to the USB jack of your personal
computer.
If you are using a laptop computer
After connecting the USB plug of this unit (plug A) to the USB jack of the
computer, go on to page 17, [Recommended connections].
If you are using a desktop computer
After first connecting this unit and the specified extension cable, connect
the USB plug of the specified extension cable (plug A) to the USB jack of
the computer.
- For Windows 98SE/2000/Me/XP -
Installation of the USB hub begins automatically. Go on to page 17,
[Recommended connections].
- For Windows 98 -
Following the instructions given on the screens shown below, install the
USB hub.
14-US