The Utility Program; Running "Hifd Connect-It - Sony SFD-FW200P Mode D'emploi

The Utility Program

The "HiFD Connect-iT" utility program is supplied with the
HiFD drive.
It is installed in the HiFD Group or folder, selected in the
Programs Menu, during installation.

Running "HiFD Connect-iT"

Click the task bar's [Start] button, point to [Programs], then
[HiFD], and click [Connect-iT].
HiFD drive's displayed properties depend on it being powered-
on when PC was started.
If power was supplied, [Connected] appears in the [Device] of
[Properties] box. Port address, IRQ and read/write mode of
HiFD also appear in this box.
If power was not supplied, [Disconnected] appears in the
[Device] of the [Properties] box.
19