Tool Identification; Main Components; Technical Data - FAR RAC 180 Mode D'emploi

RAC 180

TOOL IDENTIFICATION

The riveting tool RAC 180 is identified from a marking that
shows company name and address of manufacturer, designation
of the tool, CE. Always refer to the information on the riveting
tool when requesting technical service.
Serial number

MAIN COMPONENTS

A) ................................................................................. Nozzle
B) ............................................................Balancer connection
C) .................................................................... Nails container
D) .......................................................................Suction valve
E) ....................................................... Tensile strenght button
F) ........................................................................Oil tank plug
G) ................................................ Compressed air connection
H) ............................................. Head carring nozzle ø 22 mm
I) ................................................................ Protection bottom
Revisione - 14
Company name and
address
Designation of the tool
GB
A
57
Ø 22
D
E
302
G

TECHNICAL DATA

• Working pressure ......................................................6 BAR
• Min. int. diam. of the compressed
air feeding hose ................................... min. diam = 8 mm
• Air consumption per cycle .........................................5,4 Nl
• ............................................
Maximum force
• Weight .................................................................. 2,050 Kg
• Working temperature .............................................-5°/+50°
• Root mean square in total acceleration frequency (Ac)
to which the arms are subjected. ........................... 5,7 m/s
•
A-weighted emission sound pressure level
•
Peak C-weighted instantaneous sound pressure
•
A-weighted sound power
AIR FEED
The air feed must be free from foreign bodies and humidity
in order to protect the tool from premature wear and tear of
the components in movement, therefore we suggest to use a
lubrificator group for compressed air.
Date 03-2019
305
C
B
H
F
I
Ø 130
6 BAR - 10526 N
..................
.............................................
Ø 60
2
75 dBA
.......
<130 dBC
88 dBA
13